Skip to main content

This machine is so bad that most of the Xerox dealers in the country have elected not to sell it. The system was designed by Fuji Xerox as a six copy and nine copy per minute solution. It simply does not meet American standards. At its best, which is not good, the machine functions as a wide format copier. It will make multiple copies and reduce and enlarge but the steps required to produce a copy are clumsy and not at all intuitive. In its plotter mode, the machine is at best adequate. The hang up is that in plot mode the output speed is cut in about half. The ultimate debacle is encountered when the 6050/6030 is installed in its ?Scan to File? configuration. The explanation give for this is that the systems components are incompatible and that they simply have difficulty talking to each other. In addition to the systems problems this unit has, the purchaser must contend with a machine that is mostly plastic. The 6050/6030 is rated for a monthly output of 4,500 square feet. At this rate it is doubtful if the system will be able to last for the production of 100,000 square feet of copy.



In short, do yourself a favor and stay away from this machine. Shame on you Mother X.
Original Post

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×