Skip to main content

Hello !

I'm a newer to this role and brand new to wideformat. I have a potential new customer who currently has an Oce. I have proposed the W6700 and he seems very interested. However he does E size prints and not sure about the rear exit output compared to what he is used to. I am looking for some feedback on what your customers liked and didn't etc.

Also since wideformat is new to me I tried looking for a good video of the W6700 in action and had no luck. Does anyone have any video links they could share? This would be so helpful! 

 

Thank you!

Original Post

Replies sorted oldest to newest

Got it, what we use is an exit tray that is sold by "Copier Solution Shop". The new exit tray will allow "e" size documents to exit to the front of the W6700 and they don't have to use the rear exit.  I believe it will stack 50 or so. All of my clients love and their has never been a complaint.  Here's the link https://www.copiersolutionshop...put-tray-rot-1.html, I will check for a video. I thought I posted one in the "pic's" section of this site.

Like Art, it is rare that a 6700 leaves here without the aftermarket try.  Just a heads up on that tray.......if the customer bumps into the tray there is a very good chance that the metal tray will fall on your customer's feet.  I had it happen to me.  To see what I mean mount the tray on your 6700 and push the tray forward in the center......the two hooks will disengage and the tray will come crashing down.  I came up with a very simple modification to this tray that will eliminate the possibility of this ever happening.  The addition of a couple of self adhesive bumpers strategically placed on the tray between it and the 6700 will eliminate the possibility of the tray accidentally pushing back and falling off of the copier.  These peel and stick bumpers can be found at your local hardware store for about $2.00 usually found with the chair hardware.

Last edited by fisher

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×