PT 460 Multi Tray Bin

If this is what I’ve seen in the field, no good. We are already replacing it. When a multi page document is copied, the copies come out in reverse order on the bin. You would need an inverter. In user tools you can not send faxes, prints and copies to the separate bins. This unit wont save anyone money!

I haven't sold this option, but from what I understand it is basically another external exit tray which will give you a total of 4 exit trays when using the system as a MFP. The trays don't shift or staple. Normally if you don't add the booklet or stapling finisher, you only have the external and internal trays. The standard external tray copies and prints in reverse order and is pain in the rear - I'm not sure of the PT-460 trays. I've only used the standard external tray to route faxes to....

If you are talking about the three bins that can be mounted to the exit of the color/bw 28/32/38 pg unit, then I have some customers with it. Only the top bin is a face up bin, so I set that bin for fax and go into user tools and set fax to exit in reverse order, ok as long as the incoming fax isn't too large ex. more than 56pages, can run out of memory and loose the rest of the fax, if one doesn't expand the memory. The top bin is where paper will exit if thick mode is selected, a relatively straight path.