My network is based with Microsoft, MFP 2035 configured it forms it of the following way:
IP, Subnet Mask, Gateway, Domain, Protocol : IP and SMB... when i try explorer the network, dont enter.
Original Post
Replies sorted oldest to newest
I think your saying you can't browse the network. I usually enter \\computer name and then hit the browse button, which if it can resolve the name should prompt for a proper login. which you should be able to put in user name and password to browse the computer. hope this helps
May also want to make sure that the PC's have a folder shared with full/change rights. Otherwise you may not be able to browse the network.
Is the MFP part of the domain?
That problem could be caused by a incorrect WINS server setting. Find out if there is a WINS server on the network your trying to connect. If so be sure to enter the IP adress (of the WINS Server) in the network settings menu in the copier. Without the proper information the copier will not be able to resolve the computer names on the network. Slim463