Skip to main content

two questions why on a ricoh aficio color 6010
labels stop before the fuser...when printing....but will pass through when copying

and the ricoh 1105 are these machines good to work on? just sold one and I am the service tech
what parts should I carry this machine is in a print shop cannot be down.. please help TIA Patricia
Original Post

Replies sorted oldest to newest

the 1105 is a couple of years old and has had alot of mods issued i would reference mods on the tsc sit. as for what to carry, a complete pm kit and drum to start. also have developer readily available, now that is the easy stuff. the most important thing in this machine is keeping it running clean, mods for the dv unit are very important. also keep drum end seals in good condition. check behind the flywheel on pm to be sure no buildup of toner dusting occurs, you can easily lose your reg motor if the area gets to dirty. the drive gear for reg will getgummed up on the shaft and will cause random jamming then motor failure.

good luck
quote:
Originally posted by dscott:
the 1105 is a couple of years old and has had alot of mods issued i would reference mods on the tsc sit. as for what to carry, a complete pm kit and drum to start. also have developer readily available, now that is the easy stuff. the most important thing in this machine is keeping it running clean, mods for the dv unit are very important. also keep drum end seals in good condition. check behind the flywheel on pm to be sure no buildup of toner dusting occurs, you can easily lose your reg motor if the area gets to dirty. the drive gear for reg will getgummed up on the shaft and will cause random jamming then motor failure.

good luck
thanx know of anyone that works on the 6513?? I have one that constantly throws a 370 code I have already looked through the tsc site have parts on order and did the adjustments any other ideas? TIA Patricia

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×