AutoCAD 2010, win7, plotbase 3.7.1

AD (Guest)

I have a customer who is upgrading workstations and moving to Windows 7 with ACAD 2010. They have been reluctant to upgrade from plotbase 3.5 due to the reduced quality of aerial photos (fewer grayscale controls in 3.6 and 3.7 windows driver, and plot to file is clumsy using HDI)
Has anyone tried AutoCAD 2010 with Plotbase 3.7.1 clients?

1/14/1011:01 AM

❤️ 0

Original Post

Replies sorted oldest to newest

AndrewMTBTMember

I am not aware that the HDI driver for 2010 is even avaliable. I have been in direct contct with Ricoh and they say it could be atleast another month before this is avaliable.

1/14/1011:12 AM

❤️ 0

AD (Guest)

An update for anyone interested: As noted in another post RW-480 3.7.1 sp2 does (unofficially) work with 64 bit Windows 7 and AutoCAD 2010. I did not test and HDI driver, but WINprint works so far (shared from controller, right click, connect). I had another customer with the same setup report messages that the driver needed an upgrade. It turned out that was a different issue, they are OK too.

1/26/1012:49 PM