Skip to main content

Be careful when placing the 2090 in an environment with Scanned PDF images. We just learned a huge lesson in an account where this was the main application. The 2090 with the print scan board and PS option performed terrible. Probably will lose to the 8500 w/ M1. Ricoh is aware of the problem
Original Post

Replies sorted oldest to newest

We had a major problem with the 2090 and PostScript. We had one with the SR90 Booklet finisher that wouldn't work. The machine and booklet maker worked fine with the PCL and RPCS drivers, but when they used the postscript drivers with the normal finisher attached it worked fine. When they connected the SR90, the postscript drivers left the machine, and the machine registered as if the postscript was not on the Print Controller. It took about 10 calls, just as many e-mails, and a Big-Wig from Ricoh to come down and load some more recent fixes in the firmware. Now they work fine, and we got an order for a couple more. I think that Ricoh didn't test the postscript properly with this model before realsing it.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×