Tagged With "Fiery"
Reply
Re: Saudi-Based United Carton Industries Company Invests in Digital with EFI Nozomi Corrugated Printer
Ever since I saw the name Nozomi I was curious where it came from. I found this on wikipedia Nozomi ( Japanese : のぞみ , lit. "Wish" or "Hope," and known before launch as Planet-B ) was a Mars orbiter that failed to reach Mars due to electrical failures. The mission was terminated on December 31, 2003. [ citation needed ] https://en.wikipedia.org/wiki/Nozomi_%28spacecraft%29
Reply
Re: Saudi-Based United Carton Industries Company Invests in Digital with EFI Nozomi Corrugated Printer
https://en.wikipedia.org/wiki/Nozomi_(train)
Reply
Re: MP C5100 PRO & EB 22 Fiery
The user loves the fact that they can send their 11x17 spreads to the doc server and then configure the print settings at the copier. Just trying to accommodate the end user
Reply
Re: MP C5100 PRO & EB 22 Fiery
Since they have the Fiery, once the job is printed it can be archived on the Fiery, all print settings will stay with that job. Make sure they have command work station installed on their PC and log into the fiery controller, right click on the print job and archive it.
Reply
Re: MP C5100 PRO & EB 22 Fiery
You can still use the document server with the fiery using the fiery postscript driver or the fiery pcl driver. In the PS driver just click the job properties tab, check document server, and fill in a name or whatever you want.
Reply
Re: MP C5100 PRO & EB 22 Fiery
I have had people want to do this too because it's easier to figure out. Also you can't change any job properties except the quantity when reprinting from the fiery.
Reply
Re: Xerox C75 Press Question
Yes. You can get an EFI external or embedded RIP with this machine. There is also a Xerox FreeFlow RIP option.
Reply
Re: Xerox C75 Press Question
The embedded is the cheapest(followed by the FreeFlow, then the External)
Reply
Re: Xerox C75 Press Question
The embedded Fiery is quite a bit cheaper, but comes very basic. I have had a few instances in which my customer had to buy the Impose package afterwards. The Fiery EX server includes Compose, Impose, and the Color Profiler Suite with the ES-2000 Spectrophotometer, a must have for all Print-for-Pay shops.
Reply
Re: Fiery Impose Question for EB-22
Typically that is a dongle inserted in the CPU. So, you could move the dongle from one fiery to the next.....cumbersome!
Reply
Re: Fiery Impose Question for EB-22
Art. Just found out that impose is now being licensed. No dingle anymore. However, you can impose on one fiery and export as a pdf. Call me if you need to...
Comment
Re: This Week in the Copier Industry 15 Years Ago (Third Week of January 2003)
This is an automated response. Your email...
Reply
Re: HP launches new A3 color laser MFP
now this is pretty interesting "HP Custom Color Manager". Curious if this software would also have similar features that come with a fiery also
Blog Post
Selling Copiers "The Rep that BS's the Prospect"
I apologize for not being able to write as much as I usually do. December was a rather busy month, in fact the busiest December in years. Cheers to that! It all started a few weeks ago when received a lead (yippee) that was labeled "looking to lease a printer" . I wasn't excited about the word "printer". However, a lead is a lead and follow up has to be immediate when you get a new lead. The Call I was able to connect with the prospect that day on the phone. I was asked if I sold Canon, I...
Blog Post
This Week in the Copier Industry 10 Years Ago, The First Week in January 2009
Ten years ago this week and what was on our minds? It was the Great Recession. I remember it all too well. Many of my accounts were in the AEC market, remember losing almost 30% of that business because of bankruptcies, companies closing and companies just buying their device once they came to the end of the lease. Hope I never have to go through that again! Enjoy the threads from ten year ago this week! Weekend Copier Notes from 1/4/09 Neal · 1/5/097:19 AM According to survey of printshops...
Topic
EFI rolls out new superwide VUTEk h5 and new Fiery DFE at Connect
EFI’s new 126-inch (320cm) wide VUTEk h5 hybrid LED printer can run up to 109 boards per hour and offers eight-colour and optional four-colour printing modes plus white, as well as an up to nine-layer print capability. EFI CEO Bill Muir at the Connect conference in Las Vegas Digital innovator Electronics For Imaging (EFI) has opened its 20 th annual global users’ conference in Las Vegas with the official launch of several new digital print technologies, including: - EFI’s newest high-speed,...
Topic
New EFI Fiery FS350 Pro Raises the Bar in Digital Print Integration and Productivity
New EFI Fiery FS350 Pro Software Raises the Bar in Digital Print Integration and Productivity LAS VEGAS -- January 24, 2019 -- Electronics For Imaging, Inc. (Nasdaq:EFII) revealed its latest digital front end (DFE) technology for advanced, high-end digital print production. New EFI™ Fiery® FS350 Pro software will give graphic arts professionals more power, productivity and versatility in digital printing. The new Fiery offering – which EFI is showing for the first time this week at its...
Topic
Custom Color Adds Capacity and Quality for Growth with its
NEWS -- FOR IMMEDIATE RELEASE Custom Color Adds Capacity and Quality for Growth with its New High-speed EFI VUTEk Inkjet Press FREMONT, California -- September 26, 2018 -- Lenexa, Kansas-based Custom Color Corp. has long excelled in developing unique, high-value superwide-format graphics applications, and now the company is taking some of its best work into a higher gear with a newly installed EFI™ VUTEk® HS125 Pro hybrid flatbed/roll inkjet press and an EFI Fiery® proServer digital front...
Topic
EFI Fiery DesignPro Reduces Design Time and Delivers True Color Separations for Stunning Textile Prints
EFI Fiery DesignPro Reduces Design Time and Delivers True Color Separations for Stunning Textile Prints FREMONT, California -- October 17, 2018 -- Apparel and textile design professionals can streamline their design processes, saving significant time and empowering designers to get the best possible print results, with updated and new tools available in version 4 of the EFI™ Fiery® DesignPro software suite from Electronics For Imaging, Inc. (Nasdaq:EFII). The new version of this suite of...
Topic
New EFI Fiery DFE for Konica Minolta AccurioPress 6136 Series Delivers Best-in-Class Quality, Productivity and Workflow Integration
New EFI Fiery DFE for Konica Minolta AccurioPress 6136 Series Delivers Best-in-Class Quality, Productivity and Workflow Integration FREMONT, California -- August 13, 2018 -- Electronics For Imaging, Inc. (Nasdaq:EFII), and Konica Minolta Business Solutions U.S.A. , Inc. announced a new EFI™ Fiery® digital front end (DFE) designed to drive the AccurioPress™ 6136 series of monochrome digital presses from Konica Minolta ®. Running on the latest EFI Fiery FS300 Pro software platform, the new EFI...
Topic
EFI and Ricoh Deliver Powerful New Fiery DFEs for Ricoh Pro C7200 Series Production Printers
FREMONT, Calif., July 26, 2018 (GLOBE NEWSWIRE) -- Electronics For Imaging , Inc. (Nasdaq: EFII ) today announced the availability of three new EFI™ Fiery ® digital front ends (DFEs) driving RICOH Pro C7200 series production printers. “Fiery is the premier DFE platform for commercial digital print, and we’re pleased to use the latest Fiery technology for our newest digital sheet-fed presses,” said John Fulena, vice president of the Commercial & Industrial Printing Business Group at Ricoh...
Topic
Apparel Industry Approaching the Next Level in Digital Transformation with New EFI Offerings at MAGIC
LAS VEGAS -- August 9, 2018 -- A highlight of this month’s Sourcing at MAGIC tradeshow, the EFI™ Textile Eco-System for the fashion industry from Electronics For Imaging, Inc. (Nasdaq:EFII), allows customers to thrive with efficient, cost-effective digital apparel production. EFI’s exhibit at the August 12-15 event showcases one of the industry’s only complete offerings to create a better paradigm in small-lot and sample apparel production – with new and updated products from EFI’s...
Topic
New Integration with Duplo Finishers and EFI Fiery Digital Front Ends Brings Automation to Print Finishing Workflows
NEWS -- FOR IMMEDIATE RELEASE New Integration with Duplo Finishers and EFI Fiery Digital Front Ends Brings Automation to Print Finishing Workflows FREMONT, California -- August 14, 2018 -- Electronics For Imaging, Inc. (Nasdaq:EFII), and Duplo Corporation have announced a new, timesaving integration between EFI’s Fiery ® production workflow for digital print devices and Duplo’s Slitter/Cutter/Creasers. This new offering allows for efficient, automated imposition layout and production from...
Topic
New Fiery DFE and High-speed LED Inkjet Solutions Drive Growth at EFI Connect
NEWS – For Immediate Release New Fiery DFE and High-speed LED Inkjet Solutions Drive Customer Digital Print Growth at 20th Annual EFI Connect Conference LAS VEGAS -- January 22, 2019 -- Printing, packaging and industrial manufacturing professionals from across the globe are converging on Wynn Las Vegas, learning new ways to advance their businesses at one of the world’s top print conferences, EFI™ Connect . The 20th annual Electronics For Imaging, Inc. (Nasdaq :EFII ) users conference is...
Topic
EFI Introduces Next-generation Single-pass Reggiani BOLT Textile Digital Printer
NEWS -- FOR IMMEDIATE RELEASE EFI Introduces Next-generation Single-pass Reggiani BOLT Textile Digital Printer BERGAMO, Italy -- November 15, 2018 -- The brand-new, next-generation, single-pass EFI™ Reggiani BOLT textile digital printer from Electronics For Imaging, Inc . (Nasdaq:EFII) made its debut this week during an open house event at the EFI Reggiani facility in Bergamo, Italy. The advanced, ultra-high-speed digital single-pass printer has the potential to revolutionize the textile...
Topic
EFI launches new wide format inkjet
EFI launches new wide format inkjet - launching a new mid-range roll-to-roll color inkjet printer line, the VUTEk D3r and D5r LED series - offers combination of CMYK as well as white and clear inks - Museum print mode - supports collection of options for VUTEk roll-to-roll LED printers - VUTEk D3r, prints up to 2,196 square feet per hour o Up to 3.5 meters wide media handling - VUTEk D5r, prints up to 2,626 square feet per hour o Up to 5.2 meters wide media handling - Up to 1200x1200dpi -...
Topic
Ricoh to Launch New Color Production Gear
- Will replace the Pro C5210s and C5200s models with the Pro C5310s and Pro C5300s - Top speeds of 80ppm and 65ppm respectively - Use 4 tandem OPC drums for production color laser output - Will have dark gray plastic exterior - 4,400 sheet vacuum feed paper deck option, handles coated media up to 360gsm - Optional GBC StreamWire inline wirebound booklet maker - Optional EFI Fiery E-47B server - Color toner cartridge yield of 26,000 pages based on 5% - Black toner cartridge yield of 31,000...
Topic
NEWS: Poland’s Digit Pack Moves to Corrugated Digital with EFI Nozomi C18000
NEWS -- FOR IMMEDIATE RELEASE Innovative Polish Company Moves Business Core to Corrugated Digital Printing with EFI Nozomi C18000 FREMONT, California -- May 6, 2020 -- Digit Pack, a relatively new company in the corrugated sector in Poland, has invested in the EFI™ Nozomi C18000 six-color, single-pass LED inkjet printer from Electronics For Imaging, Inc . The new printer will allow Digit Pack to expand its business in corrugated digital printing, partaking in the exciting, growing...
Topic
Xerox devices with Fiery's
Does Xerox offer an 80ppm color mfp with a fiery? Not a light production device but a basic office use MFP. Similar to the MP C8003
Topic
Embedded Fiery vs External Fiery
Which is better for the client? Can anyone list pro's & con's of each?
Topic
Xerox Helps Print Providers Capture Booming Inkjet Printing Opportunities with Two New Presses
March 01, 2016 01:06 PM Eastern Standard Time DUSSELDORF, Germany--( BUSINESS WIRE )--According to InfoTrends, production color inkjet print will account for 57 percent of the total production digital color page volume by 2019 1 . To help print providers capitalize on inkjet’s growing momentum, Xerox (NYSE:XRX) today announced it will launch two new inkjet presses, the Xerox Brenva™ HD Production Inkjet Press and the Xerox Trivor™ 2400 Inkjet Press, at drupa 2016 , May 31 – June 10 in...
Topic
New systems now available with EFI™ Fiery® workflow and digital front end for optimal performance
MAHWAH, N.J. , March 8, 2016 /PRNewswire/ -- Today, Sharp Imaging and Information Company of America (SIICA), a division of Sharp Electronics Corporation (SEC) announces that the newest additions to the Pro Series lineup, the MX-M1055 and MX-M1205 Monochrome Document Systems, are now shipping. These models continue the Sharp Pro Series legacy of simplifying print-on-demand workflows, saving time and money, and allowing businesses to bring more work in-house with professional results. The...
Topic
EFI Provides Powerful Fiery Front-End Workflow for New Canon imageRUNNER ADVANCE 6500/8500 Series MFPs
FREMONT, Calif., March 14, 2016 -- Electronics For Imaging , Inc. (Nasdaq:EFII) continues its long-term partnership with Canon by bringing to market a new Fiery ® digital front end for Canon’s new imageRUNNER ADVANCE models. The most recent result of this collaboration is the Fiery Driven™ Canon imagePASS-Y1 digital front end (DFE) for the new Canon imageRUNNER ADVANCE 6500/8500 series of multifunction printers (MFPs). “The third generation imageRUNNER ADVANCE 6500/8500 series builds on the...
Topic
EFI Announces Commercial Availability of Fiery Servers for RICOH Pro C9100 Series
FREMONT, Calif., Oct 29, 2015 (GLOBE NEWSWIRE via COMTEX) -- EFI (TM)today announced the commercial availability of new Fiery [(R)] digital front ends (DFEs) to drive the RICOH Pro C9100/C9110 production printer series. The top-performing RICOH high-speed print engine and the new Fiery DFEs, E-43 and E-83, have received Digital Press System Certification from Idealliance [(R)] , offering users a rigorously tested and verified superior color and image quality, and advanced production...
Topic
EFI, SAi Create Device Integration for Fiery Driven Print-and-Cut Platforms
SALT LAKE CITY—January 18, 2016—SA International (SAi) and EFI have announced the availability of the EFI Cut Server Option for Fiery proServer and Fiery XF digital front ends. This software option from SAi—a leading provider of software solutions for the professional sign making, wide-format digital printing and CAD/CAM for CNC machining industries—enables users of the Fiery workflow solutions to now enjoy a fully integrated, end-to-end print-and-cut workflow. SAi’s EFI Cut Server Option...
Topic
New EFI Fiery Print Server Drives CMYK+ Color Capabilities and Faster Processing for Xerox iGen 5
FREMONT, Calif., July 7, 2015 (GLOBE NEWSWIRE) -- EFI ™ (Nasdaq: EFII ) and Xerox ® have partnered to deliver the first digital print server featuring the new Fiery ® FS200 Pro digital front end (DFE) platform, which will power Xerox's new iGen ® 5 Press. Designed to drive excellent quality and productivity on the iGen 5, the Xerox EX-P 5 Print Server Powered by Fiery features EFI Fiery HyperRIP. Fiery DFEs are powered by EFI's proprietary ASIC (application specific integrated circuit) with...
Topic
EFI Appoints Patrick Morrissey as VP of Americas Sales
NEWS – For Immediate Release EFI Appoints Patrick Morrissey as VP of Americas Sales FREMONT, California -- November 2, 2015 -- Electronics For Imaging , Inc. (Nasdaq:EFII) today announced the appointment of graphic arts sales executive Patrick Morrissey to the position of vice president, Americas Sales. Morrissey will be responsible for growing regional direct sales and enhancing channel partnerships across the company’s Productivity Software, Industrial Inkjet and Fiery digital print...
Topic
Fiery Impose Question for EB-22
Question: If I have two systems with Fiery's installed. Can I just order one Fiery Impose option and would it work for both devices?
Topic
EFI Wins Nine Must See ’Ems Awards with New Technology Innovations for Print Businesses
NEWS: FOR IMMEDIATE RELEASE EFI Wins Nine Must See ’Ems Awards with New Technology Innovations for Print Businesses 2015 contest recognizes advanced Fiery innovations, integrated MIS automation and inkjet inks in EFI’s fifth consecutive year as the top Must See ’Ems honoree FREMONT, California -- September 8, 2015 -- EFI ™ (Nasdaq: EFII) earned 9 awards this year in the annual Must See ’Ems graphic arts technology competition – the most presented to any company this year. The Must See ’Ems...
Topic
EFI and Xerox Team Up to Bring Increased Power and Productivity to Digital Color Printing
EFI ™ today announced new EFI Fiery® digital front ends (DFEs) for Xerox's newest digital presses. The Xerox EX-i 80 Print Server and EX 80 Print Server Powered by Fiery are available on the Xerox Versant® 80 Press, while the Xerox EX-P 1000i Print Server Powered by Fiery is available for Xerox Color 800i/1000i Presses. "The combination of our advanced production printing solutions and EFI Fiery technologies will help ensure that our customers have the high-end quality and automated,...
Topic
New Fiery Color Profiler Suite v4.7 - Verify Color with Ease
Read Online New Fiery Color Profiler Suite v4.7 – Verify Color with Ease The new version of Fiery ® Color Profiler Suite has been updated with enhancements to the Color Verify module that will allow any user to successfully verify the accuracy of a custom printer profile. The latest version brings new features that give your customers: A simplified process of verifying color accuracy for compliance with industry standards with the updated Color Verifier module Improved output profiles from...
Topic
Inkjet Productivity, Greener LED Imaging and Workflow Innovations All in One Place at EFI’s ISA Exhibit
NEWS -- FOR IMMEDIATE RELEASE Inkjet Productivity, Greener LED Imaging and Workflow Innovations All in One Place at EFI’s ISA Exhibit LAS VEGAS , April 9, 2015 – The EFI ™ (Nasdaq: EFII) exhibit in booth 650 at this year’s ISA International Sign Expo in Las Vegas provides a full portfolio of products for signage and graphics professionals to capitalize on some of the industry’s best growth opportunities. The exhibit highlights innovation, high productivity, quality and reliability available...
Topic
EFI Extends Innovative Technology Across its Portfolio to
NEWS -- FOR IMMEDIATE RELEASE EFI Extends Innovative Technology Across its Portfolio to Create New Opportunities for Print Businesses LED, UltraDrop Technology, SuperFlex Ink and faster, automated print and workflow offerings at SGIA Expo boost graphics companies’ profit opportunities SGIA EXPO, LAS VEGAS -- October 21, 2014 – EFI ™ (Nasdaq: EFII), a world leader in customer-focused digital printing innovation, is driving improvements in printing companies’ productivity, efficiency,...