The Week in Copiers Fifteen Years Ago

Darth Vader (Guest) · 4/3/068:45 AM

I don't know anything about Unix. The customer told me that he had to develop a special driver to print the barcodes, and that he didn't want to have to develop a second driver to print to a Ricoh copier when he was already printing to a Canon. That's all I really know about it -- except that his Toshiba won't print the barcodes -- they can't even get it to stay on the network.

Topic

Art Post (Guest) · 4/5/067:44 PM

worthy of emulation by all of their peers." In awarding this honor to Moser, VARBusiness citied her success in increasing Ricoh's printer sales and growth strategy and in establishing key relationships across the reseller channel. Additionally, with her more than 25 years experience in sales and marketing of technology solutions, Moser has played an integral part in establishing Ricoh’s Printing Solutions Division. "Being a recipient of VARBusiness' ‘Top 100 Channel Executives’ award is an esteemed

Topic

mikefio22 (Guest) · 4/7/061:55 PM

I have been able to send a fax Tx report to my email, but I have to input where it is going every time I send a fax. Is there any way I can set a default Email address for the reports to go? Any help would be great

Topic

Art Post (Guest) · 4/3/067:23 PM

. Additionally, Ricoh offers a wide variety of document and printing solutions directly and through strategic alliances enhancing office productivity and document workflow. Ricoh’s document management software enhances workgroup collaboration and offers secure storage, retrieval and sharing of critical information. Ricoh Corporation directly or through its subsidiaries markets and distributes products in North, Central and South America. For fiscal year 2004, Ricoh Corporation sales exceeded $2.9

Topic

dfrazier · 4/6/0610:44 AM

I have a prospect who needs to print a 1 page document from multiple paper trays on varied color stock. Any ideas?

Topic

Soriano (Guest) · 4/6/068:46 PM

Hi guys, I wonder if any of you have seen this before, a tech went to setup the machine to scan to email, email all incoming faxes. well when he went and tried to email a page the page he got was blank in the middle(copier worked fine before he got there), It prints fine but when you try to scan anyting through the ADF or use the exposure glase we get the the blank area, please if any one hase seen this let me know how you fixed it. see sample Thanks..

Reply

copier_doc (Guest) · 4/3/0610:56 PM

Please let me clarify a few point. SP C210SF (note the spacing between SP and C) SP means this is a printer product - therefore it will print and doesn't need to tell you. C is colour product (BW has no letter, but is followed by four digits) 210 series/grade, generation, and if there are other machines the series/grade at the same generation then this value will change dependant upon what paper sizes can be used. MFP are slightly different

Reply

dwbsc (Guest) · 4/5/0610:26 PM

Try a Postscript Driver and Change the "Optimized for speed" to "Optimized for Portability" under the postscript tab. When I sold Canon (clc 1150), we had a problem with a customer printing bar codes. The bar code would come out, but would not be able to be read by the barcode reader. Switching this setting on the postscript driver fixed the issue.

Reply

turi (Guest) · 4/7/063:40 PM

Hello again all, the saga of the ELP continues and we are now calling this soap opera the ELP saga. We had changed over to PCL 6 to solve the loss of files whilst ELP printing but after a short while we noticed that we having printing rights problems. If userA created a doc and shared it with user B, after having printed it through ELP, user B cloud read and edit this file but could not print unless he inputed user A password and vice versa. Funnely enough if user B createed say another

Reply

Art Post (Guest) · 4/1/0610:22 AM

All this time I thought we could print UNIX, are you sure. Can anyone else chime in? Art Post

Reply

copier_doc (Guest) · 4/3/0610:45 PM

Make sure you have installed the SNMP component to windows before you install the software. SNMP must be on the server you use for PlotBase.

Reply

JasonR · 4/6/068:36 AM

quote: Originally posted by copier_doc: Make sure you have installed the SNMP component to windows before you install the software. SNMP must be on the server you use for PlotBase. This isn't an issue as the software WILL NOT let you install unless SNMP is installed and running. You will get an error during install saying SNMP isn't found and the install will quit.

Reply

chops · 4/6/061:02 PM

Did you try in the main Plotbase program: Configuration Properties Spool Config NEW CHANGE Default SSL Default Specific... MAINTAIN RATIO should be checked, as well as "middle center" for media type and position. ps: try changing the Default Type CFG if this does not work. I cleared up a similar problem by doing this on a 470 trying to print from program called Solid Edge.

Topic

Art Post (Guest) · 4/3/067:26 PM

Dear Ricoh Dealer: Ricoh is pleased to announce that effective May 3, 2006 the GlobalScan OCR Option Product Code 001283MIU is being repositioned bringing you new and lower dealer and Suggested Retail Pricing, however the pricing is retroactive to April 3, 2006. THIS PriceE RREPPOSIITIONIING INCLUDES:: • GlobalScan OCR Option • Best Dealer Price reduced by up to 44%. • Suggested Retail Price reduced by 40%. GG

Topic

Namibia (Guest) · 4/5/068:42 AM

I would like to know if Ricoh or a dealer has concluded a preferred supplier agreement with Volkswagen in Europe. Has anybody got information for me on this subject? Regards Phil West philw@nashua.co.za

Topic

Art Post (Guest) · 4/6/069:53 AM

What is your experience with halftones on the 480W when printing from AutoCAD, are they acceptable, or are they coming up a little short with the halftone quality? Art